sp

 

RBR Helmets & Armor

 
 

Unfortunately, the words “Active Shooter” have penetrated our vernacular. New doctrine is to send first responders straight into a scene instead of containing the shooter and waiting for a tactical team. This means the first officer on the scene could be wearing an NIJ Level II soft vest which may prove woefully inadequate. Each officer should be provided with a set of NIJ level IV plates in a carrier that can be quickly thrown over the head and clipped in place, hence the term “Throw-over-carrier”.

Defense Optics Group and RBR North America can provide departments and individual officers with outstanding protection at a price that will make you wonder why you hadn’t done it before. Please contact us for pricing.

Info@rbrnothamerica.com or info@defenseopticsgroup.com

 

 

 RBR Armor

RBR North America carries a wide variety of hard and soft armor. Level IIIa soft armor vests, level III and IV hard plates in both stand-alone and ICW versions are available with many different styles of carriers. Contact us for details. We even have armor for marine applications.

 

RBR Helmets 

 

RBR North America Helmet NIJ IIIA - MACH 1  

     
 
 


Design

It is manufactured using the latest specification aramid fibre, bound in a ballistic resin matrix. The unique LBA process ensures a homogeneous, resilient structure ideally suited for ballistic applications.
                                                

Size

The LBA MACH1 is offered in 4 basic sizes:  Small, heads up to 55cm, Medium 54-59cm, Large 57-64cm & XL for heads above 63cm.

Protection Level

The MACH helmet is available with the following protection level:

 

V50 – 17 grain fragment 580m/s to STANAG 2920
Bullet resistant to NIJ0108.01 Level IIIA
9mm Remington FMJ 8.0g @ 425 ms-1 min

 

 

Technical Specification
RBR North America PAS-TAC HELMET NIJ IIIA

 PAST-TAC shown with optional Ballistic Shield

 

Introduction

RBR North America's International’s widely adopted PAS-TAC helmet uses the Company’s unique processing techniques to provide enhanced shell protection, at lower weight, with improved comfort.
It is a general-purpose helmet for the modern combat soldier. It utilises the excellent performance of aramid, bound in a thermoplastic resin matrix. This is the key to achieving an excellent performance to weight ratio. The RBR N.A. PAS-TAC Helmet can be worn for extensive periods of time, even in adverse conditions, with superior comfort.
                                               

It is a 2 size helmet and available in different ballistic protection levels.
It is tough, durable and reliable and reflects state of the art design, materials and process technology.

Design

The helmet has a smooth conformal shape with no protrusions, sharp contour changes or snagging hazards. It is of low bulk and mass. It can be coated with an IRR paint system.
The edge is covered with a low profile neoprene rubber extrusion, which provides a forgiving and neat finish.It incorporates sufficient adjustment to allow for gas masks and a large variety of head shapes and sizes. 

Colour

The helmet is coated with an epoxy/polyurethane paint system. Standard colours are Black and Olive Drab. Other colours are available on request.

Size

Two basic helmet sizes are offered: Medium and Large. The helmet will fit the central 95% head sizes. The medium fits head sizes 54 to 59cm and the large from 57 to 64cm.

Weight

The average weights of the RBR N.A. PAS-TAC helmet are as follows


Size

Medium

Large

Level F6

1250

1350

Protection Level

The helmet is available with protection levels F6


Level F6

V50 – 17 grain fragment 650m/s (2130ft)
Bullet resistant to NIJ0108.01 Level IIIA
9mm Remington FMJ 8.0g @ 426ms-1 min
.44 Magnum LSWC 15.5g @ 426ms-1 min
7.62mm Tokarev lead @ 426s

 

 
 

Technical Specification
RBR North America Helmet NIJ IIIA - MACH III

 

Design

The MACH III is manufactured using the latest specification aramid fibre, bound in a thermoplastic resin matrix. The unique RBR N.A.process ensures a homogeneous, resilient structure ideally suited for ballistic applications.The edge is covered with a low profile neoprene rubber extrusion, which provides a forgiving and neat finish. 

Colour
The helmet is coated with an epoxy/polyurethane paint system. Standard colours are Black and Olive Drab. Other colours are available on request.

Protection Level

The MACH helmet is available with the following protection level:

 

V50 – 17 grain fragment 650m/s to STANAG 2920
Bullet resistant to NIJ0108.01 Level IIIA
9mm Remington FMJ 8.0g @ 425 ms-1 min
.44 Magnum LSWC 15.5g @ 425 ms-1 min

 

 

 

 
 
pdf RBR-NA-Helmet-MACH-1.pdf pdf RBR-NA-PAS-TAC F6 -Tech-Spec-LBA.pdf pdf RBR-North-AMerica-Helmet-MACH-III.pdf
 
 
 
Site by Barrie Web | © 2012 all rights reserved Defense Optics GroupFollows Us: